Impedance spectrometer (EIS/FRA)
A new generation of impedance spectrometer
Fiaxell is happy to present a new generation of impedance spectrometer (EIS/FRA) specially dedicated for fuel cell research & development.
Why does this product match fuel cell research ?
Impedance spectrometer for fuel cell research & development
Available in 1, 2, 5 and 10 Ampere units (40 A with booster), our impedance spectrometer with integrated galvanostat / potentiostat allows all tests from button cells up to industrial cell size stack.
Frequency range FRA/EIS: 10µHz to 1MHz (convenient for most fuel cell testing)
Floating operation, no need of ground, avoids parasitic losses
WE/RE/S/CE, 4-electrodes configuration
In/out: Analog and digital i/o, see below for technical specifications
Slim, small & light weight:
Scientist walking to another building for data acquisition
Easily transportable by hand due to its reduced dimension and weight (13 x 27 x 4 cm X 1.5 kg)
One instrument can be shared between test rigs and labs
Thick walled aluminium housing, virtually unbreakable
Extremely reliable, delivered with 3 years warranty
EU fabrication and designed by experienced EIS engineers
Cost effective and affordable for all labs (20-60 % less expensive than market prices- ask us for an offer)
Example of EIS measurement:
EIS measurement of a SOFC cell in the Open Flanges Set-up™ from Fiaxell. The cell is measured at 1, 2 and 5 Amps from 100 KHz up to 50 mHz
Smooth curves are obtained allowing equivalent circuit fitting with great accuracy
Stability & reproducible results: from high to low frequency without interruption
Intuitive and powerful software:
Equivalent circuit fitting and simulation, easy to build up
Easy to import/export data, all format included such as Zview, Zplot
Batch mode allows scheduling measurements and configuring experimental sequences
Can be controlled from LabVIEW, C++, Delphi, etc.
In conclusion, a product that makes everybody happy
Scientist just walking back from her EIS measurementsCan be shared between different test rigs/labs
Provide reliable and reproducible results
Intuitive and powerful software
EU fabrication, engineered by EIS PhD scientists
Virtually unbreakable, delivered with 3 years warranty
Cost effective for all labs, from 20 up to 60 % less expensive than standard instruments on the market
.... visit us for a product demonstration or ask for a quotation ?
Hardware specifications:
Potentiostat:
Applied potential range ±10 V, at 0.333mV resolution
Applied potential accuracy 0.2%, or 2 mV
Current ranges ±10 nA to ±100 mA (±1A, ±10A)
Measured current resolution 0.015% of current range, minimum 15pA
Measured current accuracy 0.2%
Galvanostat:
Applied current resolution 0.033% of applied current range
Applied current accuracy 0.2%
Potential ranges ±10 mV, ±100 mV, ±1 V, ±10 V (±20V)
Measured potential resolution 0.004% of potential range, minimum 0.4µV
Measured potential accuracy 0.2%, or 2mV
Impedance Analyser:
Frequency range 10µHz to 1MHz
Amplitude 0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset 16 bit dc offset subtraction, and 2 dc-decoupling filters
Miscellaneous:
Automatic current range selection: 1pA to 1A/1mV to 10V
Automatic variable noise filter and potentiostat/galvanostat stability settings
Simultaneous acquisition of current/potential and peripheral signals
Real time data display up to 500 pnts/s. Acquisition up to 100,000 pnts/s is stored in instrument memory
Applicable scan rates: 1µV/s to 10,000 V/s
Minimum interval time/resolution: 10µs
Result optimisation by automated tuned filters, gain amplifiers and dc-subtraction
Environment:
Power requirements 100-240 V, 50-60 Hz, 700mA (supply included)
Size, weight w x d x h = 13 x 27 x 4cm, 1.5 kg (1 A model)
PC requirements Windows XP/Vista/7/8, with free USB port
Contact us for further information on hardware specifications
Download the brochure:
Click on the picture to download the brochure or click here to go to all Fiaxell brochures