Rising kiln™ & rotating holder

Setup on the holder can be rotated fully for easy access for mounting/dismounting a cell or a stack. With one hand, the kiln can be moved up to close the systemThe kiln stand is a helpful assistant for single cell and stack mounting. Compatible with all Fiaxell setups (the Open Flanges, the Large Cell Tester and the Multi-Flanges), the Rising kiln™ allows performing experiments with ease. Once the cells or the stack is installed, the setup is rotated on its holder. The kiln is then lifted to close the system and the heating started.

Convenient access and working height thanks to a simple integrated compensating force mechanism. The kiln is moved up and down by just one hand.

Electrolysis and stacks with tubes going through the kiln bottom are much easier to install. Devices such as pump or potentiostat can be set close to the setup. The working height can also be adjusted on request.

Options available:

• Gas panel for flow control
• Electrical terminal for all current and voltage connections
• Ventilation hood above the setup for exhaust gas extraction
• Table for instruments (EIS, potentiostat, power supply, etc.)

Video: cell exchange and test start with the Rising kiln™

The 40 kg kiln is lowered with one hand, the setup is rotated, the tested cell (ASC) is replaced by a new one (ESC), the setup is rotated back, the kiln is raised and secured, and heating starts for the electrochemical test.